Cardium Compound for Wire Rope
ROYALEX Coat 140 series compounds are formulated using special grades of bitumen, compounded with mineral oil to get desired viscosity. ROYALEX Coat 140 series has extremely good adhesion to metals and forms a tenacious film that does not creep out under boundary conditions. ROYALEX Coat 140 series has mild properties, excellent water repellence, and is non-corrosive to most metals, including copper. It meets IS: 9554-1996 specification.
Applications / Recommendations:
- ROYALEX Coat 140 series is recommended for open gear of draglines, bushings, bull gears, crushers, steel mills, and non-critical girth gears/pinions in cement mills, rod mills, and paper mills.
- ROYALEX Coat 140 series is also recommended as a regular lubricant for wire rope operation in ships or cable car haulage.
- ROYALEX Coat 140 series is approved by RDSO for lubrication of Traction Motor gear case of locomotives.
Typical Properties
Properties | RLX Coat 140 |
Appearance | Black |
Base oil Viscosity, cst @ 100oC, ASTMD 445 | 400 -450 |
Flash Point (COC) oC, ASTM D 92 | 260+ |
Timken OK Load lb, ASTM D 2509 | 20 |
Copper Strip Corrosion, ASTM D 130, 3 hrs @ 100oC | 1a |
Health and Safety:
ROYALEX Coat 140 series compounds are not expected to produce adverse effects on health when used for the intended application and the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. For MSDS please contact your local ROYALEX Marketing / Technical Service team.
We're Royalex Lubricants
Products

Hydraulic Oil
View
Cutting Oil
View
Gear Oil
View
Engine Oil
View
Refrigeration Oil
View
Thermic Oil
View
Rubber Process Oil
View
Hobbing Oil
View
Cardium Compound for Wire Rope
View
High Temp. Grease
View
Transformer Oil
View
Compressor Oil
View
Rust Preventive
View
Silicon Fluid
View
Silicon Grease
View
Synthetic Cutting Oils
View
Mineral Cutting Oil
View
Rust Remover
View
Automatic Transmission Fluid
ViewOur Coverage
Go Up